Quote for Part 9421V1A30 of Utility Switches by Square D

Industrial Spares Distribution is your one-stop shop for top-quality Utility Switches parts, our website featuring over 2 billion new, used, obsolete, and hard-to-find listings that trace back to thousands of leading manufacturers from across the globe. You have reached the quote request page for part number 9421V1A30, a Vario manual motor control switches meet UL508 requirements as both enclosed and open manual motor controllers. They are also marked .Suitable as Motor Disconnect. allowing installation on the load side of the motor branch circuit short circuit and ground fault protection. These manual motor control switches include switches mounted in enclosure with a handle. The switch has a 20A current rating and a 5 HP at 240 V, 10 HP at 480V and a 10 HP at 600V ratings per UL508. The switch has a 32A current rating and a 5.5 kW at 230V and 240 V, 11 kW at 400V 415V and 500V and a 15 kW at 690V ratings per IEC. A KCD1YZ low profile handle is used for this device. This 60 mm by 60 mm single hole handle assembly has a red handle and yellow bezel. This switch is mounted in a metallic NEMA Type 12 enclosure. This manual motor control switch is 7.38 inches tall, 5.50 inches wide and 6.25 inches deep. This switch has no auxiliary contacts. This manual motor control switch is UL Listed and CSA certified. item manufactured by Square D. To receive quotes on part number 9421V1A30, you are always welcome to utilize the RFQ form below, and we promise rapid responses with customized solutions provided in 15 minutes or less from the review of a completed submission.

#####

To ensure the caliber of the automation control parts, programmable automation parts, industrial automation parts, and other Utility Switches items we stock, we subject much of our inventory to deliberate flaw detection testing and in-depth verification assessments. Furthermore, with our AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, you never have to worry about the fit, form, or function of industrial products like Square D part number 9421V1A30. If you have any particular questions concerning our Vario manual motor control switches meet UL508 requirements as both enclosed and open manual motor controllers. They are also marked .Suitable as Motor Disconnect. allowing installation on the load side of the motor branch circuit short circuit and ground fault protection. These manual motor control switches include switches mounted in enclosure with a handle. The switch has a 20A current rating and a 5 HP at 240 V, 10 HP at 480V and a 10 HP at 600V ratings per UL508. The switch has a 32A current rating and a 5.5 kW at 230V and 240 V, 11 kW at 400V 415V and 500V and a 15 kW at 690V ratings per IEC. A KCD1YZ low profile handle is used for this device. This 60 mm by 60 mm single hole handle assembly has a red handle and yellow bezel. This switch is mounted in a metallic NEMA Type 12 enclosure. This manual motor control switch is 7.38 inches tall, 5.50 inches wide and 6.25 inches deep. This switch has no auxiliary contacts. This manual motor control switch is UL Listed and CSA certified. items, you may always give us a call or email, and we would be more than happy to assist you however we can!